-
Chapter - 1: Introduction and Basic Concepts
-
1.4 - Classification of fluid flow
-
1.5 - System and Control Volume
-
1.6 - Importance of Dimensions and Units
-
1.7 - Modelling in Engineering - (Part 1)
-
1.7 - Modelling in Engineering - (Part 2)
-
1.8 : 1.10 - Problem solving technique, Engineering Software Packages, Accuracy, Precision, and Significant Digits
-
Tut. on Ch.1
-
Chapter - 2: Properties of Fluids
-
2.1 - Introduction
-
2.2 - Density and Specific Gravity
-
2.3 - Vapor Pressure and Cavitation
-
2.4 : 2.5 - Energy and Specific Heats, Compressibility and Speed of Sound
-
2.6 - Viscosity
-
2.7 - Surface Tension and Capillary Effect
-
Tut. on Ch.2 (Part 1)
-
Tut. on Ch.2 (Part 2)
-
Tut. on Ch.2 (Part 3)
-
Tut. on Ch.2 (Part 4)
-
Tut. on Ch.2 (Part 5)
-
-
Chapter - 3: Pressure and Fluid Statics
-
3.1 + 3.3 - Pressure, Introduction to Fluid Statics
-
3.2 - Pressure Measurement Devices
-
3.4 - Hydrostatic Forces on Submerged Plane Surfaces
-
3.5 - Hydrostatic Forces on Submerged Curved Surfaces
-
3.6 - Buoyancy & Stability
-
3.7 - Fluid in Rigid Body Motion
-
Tut. on Ch.3 (Part 1)
-
Tut. on Ch.3 (Part 2)
-
Tut. on Ch.3 (Part 3)
-
Tut. on Ch.3 (Part 4)
-
Tut. on Ch.3 (Part 5)
-
Tut. on Ch.3 (Part 6)
-
Tut. on Ch.3 (Part 7)
-
Tut. on Ch.3 (Part 8)
-
-
Chapter - 5: Bernoulli and Energy Equations
-
5.1 - Introduction
-
5.3 - Mechanical Energy and Efficiency
-
5.3 : 5.4 - Forces Acting on a Control Volume, The Bernoilli Equation
-
5.5 - General Energy Equation
-
5.6 - Energy Analysis of Steady Flows
-
Tut. on Ch.5 (Part 1)
-
Tut. on Ch.5 (Part 2)
-
-
Chapter - 6: Momentum Analysis of Flow Systems
-
6.1 - Newton's Laws
-
6.2 - Choosing a Control Volume
-
6.3 - Forces Acting on a Control Volume
-
6.4 - The Linear Momentum Equation (Part 1)
-
6.4 - The Linear Momentum Equation (Part 2)
-
6.4 - The Linear Momentum Equation (Part 3)
-
Tut. on Ch.6 (Part 1)
-
Tut. on Ch.6 (Part 2)
-
Tut. on Ch.6 (Part 3)
-
Tut. on Ch.6 (Part 4)
-
-
Chapter - 8: Internal Flow
-
8.1 - Introduction
-
8.2 - Laminar and Turbulent Flows
-
8.3 - The Entrance Region
-
8.4 - Laminar Flow in Pipes (Part 1)
-
8.4 - Laminar Flow in Pipes (Part 2)
-
8.5 - Turbulent Flow in Pipes (Part 1)
-
8.5 - Turbulent Flow in Pipes (Part 2)
-
8.6 - Minor Losses
-
8.7 - Piping Networks and Pumps Selection (Part 1)
-
8.7 - Piping Networks and Pumps Selection (Part 2)
-
8.8 - Flow Rate and Velocity Measurement
-
Tut. on Ch.8 (Part 1)
-
Tut. on Ch.8 (Part 2)
-
Tut. on Ch.8 (Part 3)
-
-
Chapter - 11: External Flow Dray and Lift
-
11.1 : 11.2 - Introduction, Drag and Lift
-
11.3 - Friction and Pressure Drag
-
11.4 - Drag Coefficients of Common Geometries
-
11.5 : 11.6 - Parallel Flow Over Flat Plates
-
11.7 - Lift
-
Examples on Ch.11
-
Tut. on Ch.11 (Part 1)
-
Tut. on Ch.11 (Part 2)
-